Touch sensitive MIDI encoder for Fatar TP/6 - TP/60 keyboards

• designed for 61-key Fatar DF or DR scanmatrices
• user selectable type scanmatrix (DF/DR)
• user-selectable velocity response curve
• user selectable MIDI channel (1 to 16)
• user selectable starting note
• 4 analog inputs with user selectable MIDI controller per input
• NEW: analog inputs auto-calibration (units produced since February 2019)
• NEW: 9 velocity response curves, 4 of which are user-configurable (units produced since February 2019)
• NEW: analog inputs can be configured to trigger not only Control Change, but also Polyphonic Aftertouch, Pitch Bend, Channel Aftertouch and Program Change (units produced since February 2019)
• NEW: user-configurable jitter threshold for each analog input individually (units produced since February 2019)
• multiple units can be daisy-chained for building multi-manual applications (check related bundles!)
• standard MIDI input for Merging and Programming (3-pin connector)
• standard MIDI output (3-pin connector)
• on-board diode bridge and voltage regulator - just apply 9-12V AC/DC from supply adapter or battery
• NOTES about user configuring:
  • configuration of this unit can be done at any time using unit-specific SysEx message, format described in documentation
  • all configurable parameters are permanently memorized in non-volatile memory
  • MS-Windows-based free software utility mkcv64smfset for programming (units produced before February 2019)
  • MS-Windows-based free software utility UpSet for programming (units produced since February 2019)